Antistatic gown cleaning
Anti -static coat is applied in electronics, optical instruments, pharmaceuticals, microbial engineering , precision instruments and other industries have special clean overalls and antistatic properties , and its lining is usually embedded in a conductive wire woven synthetic fabrics . Antistatic coat management is the most important part of cleaning , even though the fiber itself is difficult to clean soiled fibers, but how to maintain an important factor, that is a cleaning method . If using ordinary washing method , of course contrary will be smudged. Therefore, a special method must be used . Clean overalls , from the management to consider, when the cleaning must be carried out in a clean room cleaning Jie slightly decorative packaging .
Typically, anti -static coat washed once a week at least , some of the types of jobs that require high even washed once a day . In ordinary cleaning the room , will be attached to dust and bacteria , as well as contamination by the cleaning agent . In addition, the packing and handling process , there will be attached to dust and microbial hazards.
Antistatic gown cleaning generally rely on the professional cleaning company to clean, clean room cleaning process should pay attention to the following :
( 1) New sewn can be directly washed , and recovered through the discovery of oil , carefully remove the oil before washing process.
( 2 ) To scrape before washing , damage and other accessories hasp inspect the defective for repair , replacement or retirement .
( 3 ) must be used in clothes than clean room clean and high clean room cleaning, drying, packing.
( 4 ) wet, dry cleaning water to be filtered , the solvent should be used after distillation point with less than 0.2μm pore size membrane, according to need more than one filter .
( 5 ) In order to remove soluble contaminants , washed with water , and then the solvent was distilled for the final washing , remove the oily contaminants.
( 6 ) Wet washing water temperature as follows: polyester fabric (60-70C) ( maximum 70C) Nylon (50-55C) ( maximum 60C)
( 7 ) In the final rinse water permeability , the antistatic agent can be used to improve the anti-static properties , but the choice of antistatic agent should be a good combination with the fiber , no dust off.
( 8 ) with hasp overalls should be washed in engaging state .
( 9 ) the washing dedicated clean air circulation system for drying. After drying, the washing clean room dedicated folded , into a clean bag or nylon polyester , the double packaging on request , can also be vacuum plastic , packaging material is preferably a material with good anti-static . Since the folding process most prone to dust, thus folding process must be in a high level for the purification of space , such as the 100 clean overalls folded package should be carried out in the 10 environments .
